HUGANG wireless remote control grab bucket is a merging of radio remote control technology into a single rope grab for handling bulk materials. It is particularly designed for operation with single-hook cranes and ship cranes, with reliable performance and an easy operation procedure. The grab bucket could be open at any position in the air.
The wireless remote control grab bucket is widely used in bulk material handling in ships, ports, stations, factories, mines, etc. It is an ideal tool for loading and unloading bulk cargoes such as coal, mineral powder, bulk fertilizer, and yellow sand.
Our wireless remote control grab bucket can operate in high temperatures, severe cold, dust, rainy, and other environments without affecting its performance. The grab remote control distance can reach more than 100 meters. The remote control grab uses high-performance batteries, which can be used continuously for more than 100 hours after each charge.
Technical Parameters
|
Brand |
HUGANG |
|
Usage |
Bulk material handling |
|
Capacity |
12 Cubic |
|
Capacity |
6-8-10-12m³ |
|
Density |
12m³ (0.6t/m³); 6m³ (2.2t/m³) |
|
Dead Weight |
11.5T |
|
Total Lifting Capacity |
16.4t |
|
SWL of Grab |
13T |
|
Diameter of Closing Rope |
32mm |
|
Diameter of Pulley |
650mm |
|
Fall of Ropes |
3 |
|
Dome |
30 Degree |
Main Features
* The remote control grab does not need to be equipped with any additional equipment, just hang the grab bucket on the crane hook and it can work;
* The grab bucket has a simple structure, relatively few hydraulic and electronic control system components, is easy to maintain, and is suitable for long-distance use;
* The grab can be opened at any position with high efficiency;
* The two opening and closing cylinders have a good buffering effect, the grab has almost no impact and has a long service life;
* When the grab is closed, almost all telescopic parts are in a retracted state, making them less likely to rust.
Instructions for Use
* Please fully charge both sets of batteries before using the grab, or you can always have enough power for backup. However, after the battery pack has been fully charged for three months, it must be recharged to extend the service life of the battery pack.
* Place the battery pack into the grab battery compartment and plug in the power plug.
* Before starting to use, turn on the power switch and wait for 1 minute before the electronic control system can start to work normally.
* Closing the grab bucket is automatically controlled by the system. When you need to open the grab bucket, please press any direction button on the remote control. Please do not press the button for a long time.
* After the work is completed, please turn off the power switch in time.
Hot Tags: wireless remote control grab bucket, China wireless remote control grab bucket manufacturers, suppliers, factory, high-performance grab bucket, optimized grab bucket, smooth operation grab bucket
