The operating environment of dock cranes is relatively harsh, and most of them are located in ports, docks and other places where corrosion is serious. Bearings are a very important component of dock cranes. In addition to normal wear and tear during operation, corrosion also requires attention. In addition to the usual daily inspections, we should also pay attention to the anti-rust work of the bearings to improve the service life of the bearings. So what should be done specifically?
1. Surface cleaning: Choose the appropriate method according to the nature of the anti-rust material and the condition of the bearing;
2. Surface drying: After cleaning, it can be dried with filtered dry compressed air.
3. Apply anti-rust oil: After cleaning and drying the surface, you can apply anti-rust oil to coat the surface of the bearing with a layer of anti-rust oil. When applying, be careful not to cause accumulation, and also be careful not to If the coating is missed, if the location is inconvenient, you can also choose spray spraying. Use solvent-diluted anti-rust oil or a thin layer of anti-rust oil for spraying. However, complete fire protection and labor protection must be used during spraying.
https://www.wxhugang.com/
